Short answer: use a centre-bulb PVC waterstop for expansion and contraction joints that must absorb movement, a dumbbell PVC waterstop for construction joints with minimal movement, and a ribbed PVC waterstop where hydrostatic pressure is high. Choose a width that gives enough embedment on each side of the joint for the water pressure, and heat-weld all joints on site so the barrier is continuous. See Maruti's PVC water stop seal.
What is a PVC waterstop?
A PVC waterstop is a flexible polyvinyl chloride profile cast into concrete across a joint. Half of it is embedded in the first pour and half in the second, so it bridges the joint inside the concrete and blocks water from travelling through it. Its ribs or end bulbs anchor it in the concrete and lengthen the path water would have to take around it.
What are the main PVC waterstop types?
| Type | Shape | Use it for |
|---|---|---|
| Centre-bulb | Hollow central bulb that deforms as the joint moves | Expansion and contraction joints: dams, bridge expansion joints, large structures with thermal movement |
| Dumbbell | Solid web with bulb anchors at each end | Construction joints with minimal movement: basement walls, water tanks, retaining walls, slabs |
| Ribbed | Web with multiple ribs for a stronger mechanical bond with concrete | High hydrostatic pressure and underground structures |
How do you choose the width?
Wider waterstops give more embedment in the concrete and a longer water path, so they resist higher water pressure. The width must also suit the member thickness and the reinforcement, leaving enough concrete cover on each side. Your structural designer will usually specify it; if not, share the joint type, member thickness and design water head with our team and we will recommend a profile.
How are PVC waterstops installed?
- Support the waterstop in the formwork so it sits centred in the joint and cannot fold or shift during the pour.
- Use split formwork or clips; do not nail through the waterstop web.
- Join lengths, corners and intersections by heat welding so there are no gaps.
- Compact concrete carefully around the waterstop, with no voids or honeycombing on either face.
- Inspect before the second pour and repair any damage.
Should you add a swell bar or injection hose?
For basements, tanks, metro structures and other critical works, designers often combine systems. A hydrophilic swell bar or bentonite swell bar adds a sealing line on construction joints, and a re-injectable injection hose lets the joint be grouted later if a leak ever appears. See our guide to bentonite vs hydrophilic swell bars.
Where are PVC waterstops used?
Basements and underground car parks, water and sewage treatment plants, overhead and underground tanks, canals, dams and spillways, tunnels, metro stations and culverts. Maruti has manufactured PVC waterstops since 1990 and has supplied projects such as the Bhopal Metro and Chennai Metro Phase II.
Buy PVC waterstops direct from the manufacturer
We supply PVC water stop seals factory-direct across India, including Madhya Pradesh and Hyderabad. Request a quote with the joint type, width and running metres.
